LIDAR Precision Scanning Assembly
Dual Axis Gimbal-Mounted Scanning System for Ground-Based Area Surveillance and Object Detection
The LIDAR Precision Scanning Assembly is a vehicle-mounted dual-axis gimbal system designed and supplied by System Controls for precision ground-based area scanning, object detection and 3D mapping at ranges from 100 metres to 5 kilometres. Carrying approximately 50 kg of electro-optical payload including an elliptical scanning mirror, CCD camera and IR camera on the elevation platform, it delivers 0.5 µrad scanning accuracy across a full 360-degree azimuth field of regard and minus 10 to plus 30 degrees in elevation. Compliant with JSS 55555 and MIL-STD-461C, it supports raster, circular and spiral scanning patterns across five configurable operational modes.
What is the LIDAR
The LIDAR Precision Scanning Assembly is a dual-axis elevation over azimuth gimbal system mounted on a vehicle platform for precision ground-based area scanning. The azimuth axis sits on a sleeve ring driven by the azimuth drive system, while the elevation assembly is housed in a yoke structure originating from the azimuth segment of the pedestal.
| Parameter | Specification |
|---|---|
|
Configuration |
Dual axis, elevation over azimuth
|
|
Azimuth Scanning Rate
|
0.1 to 20 deg/sec (variable)
|
|
Azimuth Acceleration
|
10 deg/sec²
|
|
Azimuth Field of Regard
|
0 to 360 deg |
|
Azimuth Scanning Accuracy |
0.5 µrad |
|
Elevation Scanning Rate
|
0.1 to 20 deg/sec (variable) |
|
Elevation Acceleration
|
10 deg/sec²
|
|
Elevation Field of Regard
|
-10 to +30 deg
|
|
Elevation Scanning Accuracy
|
0.5 µrad
|
|
Payload
|
50 kg approx
|
|
Pedestal Weight
|
110 kg
|
|
LOS Jitter
|
0.2 mrad
|
|
Size
|
520 mm (L) x 600 mm (H)
|
|
Range
|
100 m to 5 km
|
|
Scanning Patterns
|
Raster / Circular / Spiral
|
|
Modes of Operation
|
Search / Detection / Concentration Measurement / Home / Slew
|
|
Torque Drive
|
Two direct drives
|
|
Servo Sensors
|
Two sets (positional and rates)
|
|
Environmental Standards
|
JSS 55555
|
|
EMI/EMC
|
MIL-STD-461C |
Full 360-Degree Area Coverage at 5 km Range
The azimuth axis covers a full 0 to 360-degree field of regard with the elevation axis spanning minus 10 to plus 30 degrees, providing comprehensive area coverage for ground-based surveillance and detection missions. At operational ranges from 100 metres to 5 kilometres, the system delivers actionable data across both close-range perimeter monitoring and extended area reconnaissance scenarios.
Multi-Sensor Electro-Optical Payload Integration
The elevation platform carries an elliptical scanning mirror as the primary payload alongside a CCD camera and an IR camera, enabling simultaneous visible and infrared imaging during scanning operations. Camera frames are acquired through a frame grabber at fast rate and processed to identify required features of the object field, supporting both day and night surveillance missions.
Sub-Microradian Scanning Accuracy
Both azimuth and elevation axes deliver 0.5 µrad scanning accuracy with LOS jitter of 0.2 mrad, supported by two sets of servo sensors covering positional and rate feedback and two direct drives with zero backlash anti-backlash gears. This precision is essential for accurate object detection, feature identification and 3D mapping across the full operational range of the system.
Configurable Scanning Patterns and Operational Modes
Three scanning patterns, raster, circular and spiral, combined with five operational modes including search, detection, concentration measurement, home and slew, give operators complete flexibility to configure the system for specific mission profiles. Scanning rates are variable from 0.1 to 20 degrees per second on both axes, with GUI-commanded control for precise mission management.
Need Help? Start Here...
Get expert assistance in selecting the right solution tailored to your performance, integration, and operational needs.
It is a dual-axis gimbal-mounted scanning system for precision area scanning, object detection and 3D mapping at ranges from 100 metres to 5 kilometres. It mounts on a vehicle platform and supports raster, circular and spiral scanning patterns with 0.5 µrad accuracy on both azimuth and elevation axes.
The elevation platform carries an elliptical scanning mirror as the primary payload, along with a CCD camera and IR camera. Frames are acquired via a frame grabber and processed to identify features of the object field for surveillance and detection.
Both axes use direct drives with zero backlash anti-backlash gears and DC motors with incremental encoders. Two sets of servo sensors covering positional and rate feedback provide closed-loop control for precision scanning performance.
The system complies with JSS 55555 Indian defence environmental standards and MIL-STD-461C for EMI/EMC.
The azimuth axis covers a full 0 to 360 degrees. The elevation axis covers minus 10 to plus 30 degrees. Both axes support scanning rates from 0.1 to 20 degrees per second variable.
The system operates at ranges from 100 metres to 5 kilometres, covering both close-range perimeter monitoring and extended area surveillance and detection missions.
